首页 > 最新目录 > 正文

07.板坯连铸中间包内气液两相流数值模拟*

日期:2013-03-15 20:00:00 点击:

.

陈晓辉,董方

( 内蒙古科技大学材料与冶金学院,内蒙古包头014010)

关键词: 中间包; 狭缝式透气砖; 两相流; 数值模拟

中图分类号: O242; TF777 文献标识码: A

摘要: 模拟研究了中间包上使用狭缝式透气砖条件下,连铸中间包内气体体积分布和流场.结果表明,狭缝宽度和气体流量对气幕挡墙的形成影响显著; 气体流量约为10 m3 /h 时,中间包内钢液的流动特性较好.

Mathematical simulation of gas-liquid two-phase flow at slab continuous casting tundish

CHEN Xiao-huiDONG Fang

( Material and Metallurgy SchoolInner Mongolia University of Science and TechnologyBaotou 014010China)

Key words: tundish; slot plug; gas-liquid two-phase flow; mathematical simulation Abstract: Slot plug used for bottom power injection was applied at tundish The distributions of the volume percentage of the gas and flow field at tundish were studied The results show that seam width and the gas flow have a significant influence on the forming of gas curtain; the flow characteristics of molten steel was better when the gas flow rate was 10 m3 /h

地址:内蒙古包头市昆都仑区阿尔丁大街7号 邮编:014010 电话:0472-5951610或0472-5953910 Email:cky@imust.edu.cn nkdxb@imust.edu.cn

版权所有:内蒙古科技大学学报编辑部(©2013)