10 变形温度对AZ80镁合金微观组织演化的影响

田董扩;李振亮;

• 1:内蒙古科技大学材料与冶金学院

•  

摘要(Abstract)：

研究了变形温度对AZ80镁合金微观组织演化的影响,利用电子背散射衍射(EBSD)技术观察分析了不同变形温度变形后的AZ80镁合金微观组织.结果表明:与400℃变形温度相对比,350℃时平均晶粒尺寸减小,平均晶粒形状纵横比减小,更有利于提高材料的塑性和强度.变形温度350℃时,小角度晶界增多,导致再结晶分数减小;几何必须位错密度增大,促使流变应力峰值增大;Schmid 因子硬取向分数增加,促进基面织构得到强化.变形温度为400℃时主要为■柱面织构,变形温度为350℃时主要为■基面织构.

关键词(KeyWords)： AZ80;EBSD;晶界;取向差;几何必须位错密度

基金项目(Foundation): 国家自然科学基金资助项目(51364032);; 内蒙古自治区自然科学基金资助项目(2018MS05039)

作者(Author): 田董扩;李振亮;

Email:

参考文献(References)：

• [1] 李欣,李振亮,段宝玉,等.挤压-室温轧制对尺寸不对称喷射沉积含Gd镁合金组织及织构影响[J].稀有金属,2018,42(10):1024-1031.

• [2] KASEEM M,CHUNG B K,YANG H W,et al.Effect of deformation temperature on microstructure and mechanical properties of AZ31 mg alloy processed by differential-speed rolling [J].Journal of Materials Science & Technology,2015,31(05):498-503.

• [3] KIM Y J,KIM S H,LEE J U,et al.Effects of cold pre-forging on microstructure and tensile properties of extruded AZ80 alloy [J].Materials Science & Engineering A,2017,708(21):405-410.

• [4] YU H,PARK S H,YOU B S.Development of extraordinary high-strength Mg-8Al-0.5Zn alloy via a low temperature and slow speed extrusion [J].Materials Science & Engineering A,2014,610(29):445-449.

• [5] GUO Q,YAN H G,CHEN Z H,et al.Grain refinement in as-cast AZ80 mg alloy under large strain deformation[J].Materials Characterization,2006,58(2):162-167.

• [6] 杨明,杨永顺,杨栋栋.变形温度对AZ80镁合金组织性能的影响研究 [J].热加工工艺,2011,40(16):24-26.

• [7] YOSHIDA Y,CISAR L,KAMADO S,et al.Effect of microstructural factors on tensile properties of an ECAE-processed AZ31 magnesium alloy [J].Materials Transactions,2003,44(4) :468-475.

• [8] 宋广胜,赵原野,张士宏,等.织构对AZ31镁合金温热压缩变形机制影响[J].中国有色金属学报,2018,28(11):2206-2216.

• [9] KORLA R,CHOKSHI A H.Strain-rate sensitivity and microstructural evolution in a Mg-Al-Zn alloy [J].Scripta Materialia,2010,63(9):913-916.

• [10] BARNETT M R,KESHAVARZ Z,BEER A G,et al.Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn [J].Acta Materialia,2004,52(17):5093-5103.

• [11] DING H L,LIU L F,KAMADO S,et al.Study of the microstructure,texture and tensile properties of as-extruded AZ91 magnesium alloy [J].Journal of Alloys and Compounds,2008,456(1):400-406.

• [12] YAN Z F,WANG D H,HE X L,et al.Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect [J].Materials Science & Engineering A,2018,723(18):212-220.

• [13] KRAJNAK T,MINARIK P,STRASKA L,et al.Influence of equal channel angular pressing temperature on texture,microstructure and mechanical properties of extruded AX41 magnesium [J].Journal of Alloys and Compounds,2017,705(25):273-282.

• [14] ZHOU X J,ZHANG J,CHEN X M,et al.Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment [J].Journal of Alloys and Compounds,2019,787(30):551-559.

• [15] 杨平,胡轶嵩,崔凤娥.镁合金AZ31高温形变机制的织构分析[J].材料研究学报,2004,(01):52-59.

• [16] MA X L,HUANG C X,MOERING J,et al.Mechanical properties of copper/bronze laminates:Role of interfaces [J].Acta Materialia,2016,116(1):43-52.

• [17] 王雪英,陈忠家,王梓杰,等.不同温度下镁合金挤压棒材组织性能研究[J].有色金属加工,2018,47(03):10-14.

• [18] WANG Y N,HUANG J C.Texture analysis in hexagonal materials [J].Materials Chemistry and Physics,2003,81(1):11-26.